香港荃灣白田壩街 5-21 號嘉力工業中心 A 座 9 樓 5 - 6 室 電話 : (852) 2415 4917, 傳真 : (852) 2415 4869

Chucks of drilling ALBRECHT

• Automatic tightening
• Automatic tightening with ring of safety
• Tightening by spanner (photo)
  The key offers a very great gripping force.
• Chucks of safety to tightening by key 6 sides

These chucks offer a power of tightening even more significant and can turn indifferently in the two directions without risk of loosening.

Certain chucks are available with watering, very out of stainless steel, or with set with diamonds bits.

Flexible device of Loc-line watering

Insensitive with the vibrations, Loc-Line remains in place during machining.

It is manufactured in a material acetal copolymer of first category, which is chemically resistant to the products derived from oil and the current chemicals.

Some is the curve of Loc-Line, the internal diameter remains unchanged and the flow remains constant.

Loc-Line exists in three dimensions: Ø inter. 6.35 - 12.7 and 19.05 mm

Revolving points ROYAL PRODUCTS

• Revolving points of high degree of accuracy.
• Robust design.
• High degree of accuracy of manufacture.
• Significant longevity even under strong load.
• Point standard Ø 15.8 with Ø 50.8 mm.
• Point released from Ø 9.52 with Ø 19.05 mm.
• Morse taper of N°1 with N°6

Mask-grooves

Profiled out of aluminium. Release the surface of the table perfectly.
Available by 5 segments of 400 mm or in length of 1 meter.
For grooves of: 14, 16, 18, 20, 22, 28 and 36 mm.

Let us stop for face chucks

Let us stop out of aluminium for modular plates.
Completely smooth, they settle and are withdrawn in a few seconds.
For holes: Ø 16, 18, 20, 22, 24 and 26 mm.