Class X Individual Gage Sets

Class X Gage Sets & Pins

Class X Individual Gage Sets

Gage Set No.	Gage - Size	# of Pieces
M0XM - minus	.011 to .060	50
M0XP - plus	.011 to .060	50
M05XM - minus	.0115 to .0605	50
M05XP - plus	.0115 to .0605	50
M1XM - minus	.061 to .250	190
M1XP - plus	.061 to .250	190
M15XM - minus	.0615 to .2505	190
M15XP - plus	.0615 to .2505	190
C10XM - minus	.011 to .250	240
C10XP - plus	.011 to .250	240
C105XM - minus	.0115 to .2505	240
C105XP - plus	.0115 to .2505	240
M2XM - minus	.251 to .500	250
M2XP - plus	.251 to .500	250
M25XM - minus	.2515 to .5005	250
M25XP - plus	.2515 to .5005	250
M3XM - minus	.501 to .625	125
M3XP - plus	.501 to .625	125
M35XM - minus	.5015 to .6255	125
M35XP - plus	.5015 to .6255	125
M4XM - minus	.626 to .750	125
M4XP - plus	.626 to .750	125
M45XM - minus	.6265 to .7505	125
M45XP - plus	.6265 to .7505	125
M5XM - minus	.751 to .832	82
M5XP - plus	.751 to .832	82
M55XM - minus	.7515 to .8325	82
M55XP - plus	.7515 to .8325	82
M6XM - minus	.833 to .916	84
M6XP - plus	.833 to .916	84
M65XM - minus	.8335 to .9165	84
M65XP - plus	.8335 to .9165	84
M7XM - minus	.917 to 1.000	84
M7XP - plus	.917 to 1.000	84
M75XM - minus	.9175 to 1.0005	84
M75XP - plus	.9175 to 1.0005	84

Features:

Boxes and gages both marked.
Size and serial number laser etched on each piece (M-OX not etched).
Material: 52100 Bearing Steel.
No sharp edges.
All members 2" long.

Uses:

Checking locations.
Measuring hole sizes and depth.
GO & NO/GO gaging.
Setting micrometers.
Checking distances between holes.

Finish:

Centerless lapped.
Each gage is inspected and has a 2 micro finish or better.
Heat treated to a hardness of 60-62 Rockwell C.
All English gages with .00004" limit.

Class X Individual Gage Pins
Replace missing pins! Don't live with broken sets. We stock these replacement pins in even and half thousand sizes for immediate shipment. All pins over .060" or 1.51mm are laser marked with size and direction of tolerance. But we don't stop there, we've also added a serial number lasered onto each piece for traceability.

Class X One Tenth Sets

MG-25 Series One Tenth Gage Pin Sets

MG-25 Series pin sets contain 25 pieces of Class X tolerance (.00004") gage pins. Sets consist of a center nominal size, and 12 sizes larger in .0001" increments and 12 sizes smaller in .0001" increments.

Use as a masters to calibrate measuring equipment and check linearity of your comparators, micrometers, and calipers. These "Tenth Step" gage sets have unlimited applications, such as quality control inspection, prototype work and production layout. Inspectors select from the range of pins to find the size of a hole or slot. These round masters simulate a cylindrical part which unlike flat blocks, can detect uneven wear on the tips of micrometers and calipers. The thin "line" of contact detects uneven face wear on micrometers more than flat gage blocks with large contact area.

Features:

Sets contain 25 pieces of Class X tolerance (.00004") gage pins.
Choice of two tolerances Plus (+.00004") or Minus (-.00004").
Sets consists of a center nominal size, and 12 gages larger in .0001" steps 12 gages smaller .0001" steps.
Each gage is inspected and has a 2 micro-finish or better.
Heat treated a through hardened to 60-62 Rockwell C.
All pin gages over .060" or 1.51mm are laser marked with size direction of tolerance and serial number for traceability.

Gage Set No.	Nominal Size Range
MG1-25	.0110 - .0609	.28mm - 1.54mm
MG2-25	.0610 - .2509	1.55mm - 6.37mm
MG3-25	.2510 - .5009	6.38mm - 12.72mm
MG4-25	.5010 - .7499	12.73mm - 19.04mm
MG5-25	.7500 - .8129	19.05mm - 20.64mm
MG6-25	.8130 - 1.00	20.65mm - 25.40mm