香港荃灣白田壩街 5-21 號嘉力工業中心 A 座 9 樓 5 - 6 室

電話 : (852) 2415 4917, 傳真 : (852) 2415 4869
[ 上一頁 ]
The Meyer Difference

　

The Meyer Difference
The Material. We use only superb quality steels such as 06 or Alloy Steels such as 8620 and Heat Treat our blanks to a minimum of 58RC.

The Stabilization Process. Subsequent grinding operations can introduce heat and stress. Meyer puts all blanks through a stabilization process, cycling them through temperature extremes from -130蚌 to +300蚌.

The Precision Lapping Process. "Lapping" is the finishing process that removes small amounts of material from the gage surface and brings it within its final tolerance limits.

Inspection with NIST - traceable gages. In our Metrology area conditions are a strict, cool 68蚌 with a relative humidity is between 30- 50% and all of our masters are traceable to NIST.

Chrome Ring Gages - .125" - 4.010" (3.177mm - 101.85mm)
MASTER: bilateral (split) tolerance - GO: unilateral (one way) minus tolerance. - NO GO: unilateral (one way) plus tolerance.
Ring Gages are manufactured in accordance with ANSI spec B89.1.6 - 1989.  ROUNDNESS and TAPER of all gages will not exceed 50% of applicable gagemaker's size tolerance and are nonaccumulative.
Size Range Class XX In
Quantities of:		 Class X In
Quantities of:		 Class Y In
Quantities of:		 Class Z In
Quantities of:
Inches
Above To and
Including		 Millimeters
Above To and
Including		 1 2 3-5 1 2 3-5 1 2 3-5 1 2
.125 -
.150		 3.18 -
3.81		 　 　 　 　 　 　 　 　 　 　 　
.150 -
.185		 3.81 -
4.69		 　 　 　 　 　 　 　 　 　 　 　
.185 -
.230		 4.69 -
5.84		 　 　 　 　 　 　 　 　 　 　 　
.230 -
.365		 5.84 -
9.27		 　 　 　 　 　 　 　 　 　 　 　
.365 -
.510		 9.27 -
12.95		 　 　 　 　 　 　 　 　 　 　 　
.510 - .825       12.95 - 20.96 　 　 　 　 　 　 　 　 　 　 　
.825 - 1.135 20.96 - 28.83 　 　 　 　 　 　 　 　 　 　 　
1.135 - 1.510 28.83 - 38.35 　 　 　 　 　 　 　 　 　 　 　
1.510 - 2.010 38.35 - 51.05 　 　 　 　 　 　 　 　 　 　 　
2.010 - 2.510 51.01 - 63.75 　 　 　 　 　 　 　 　 　 　 　
2.510 - 3.010 63.75 - 76.45 　 　 　 　 　 　 　 　 　 　 　
3.010 - 3.510 76.45 - 89.15 　 　 　 　 　 　 　 　 　 　 　
3.510 - 4.010 89.15 - 101.85 　 　 　 　 　 　 　 　 　 　 　

Steel Ring Gages - .040" - 4.010" (1.02mm - 101.85mm)
MASTER: bilateral (split) tolerance - GO: unilateral (one way) minus tolerance. - NO GO: unilateral (one way) plus tolerance.
Ring Gages are manufactured in accordance with ANSI spec B89.1.6 - 1989.  ROUNDNESS and TAPER of all gages will not exceed 50% of applicable gagemaker's size tolerance and are nonaccumulative.

Size Range

 Class XX In
Quantities of:		 Class X In
Quantities of:		 Class Y In
Quantities of:		 Class Z In
Quantities of:
Inches
Above To and
Including		 Millimeters
Above To and
Including		 1 2 3-5 1 2 3-5 1 2 3-5 1 2
.040 - .070 1.02 - 
1.78		 　 　 　 　 　 　 　 　 　 　 　
.070 - .100 1.78 - 
2.54		 　 　 　 　 　 　 　 　 　 　 　
.100 - .125 2.54 - 
3.18		 　 　 　 　 　 　 　 　 　 　 　
.125 - .150 3.18 - 
3.81		 　 　 　 　 　 　 　 　 　 　 　
.150 - .185 3.81 - 
4.70		 　 　 　 　 　 　 　 　 　 　 　
.185 - .240 4.70 - 
6.10		 　 　 　 　 　 　 　 　 　 　 　
.240 - .365 6.10 - 
9.27		 　 　 　 　 　 　 　 　 　 　 　
.365 - .510 9.27 - 
12.95		 　 　 　 　 　 　 　 　 　 　 　
.510 - .825 12.95 - 20.96 　 　 　 　 　 　 　 　 　 　 　
.825 - 1.135 20.96 - 28.83 　 　 　 　 　 　 　 　 　 　 　
1.135 - 1.510 28.83 - 38.35 　 　 　 　 　 　 　 　 　 　 　
1.510 - 2.010 38.35 - 51.05 　 　 　 　 　 　 　 　 　 　 　
2.010 - 2.510 51.01 - 63.75 　 　 　 　 　 　 　 　 　 　 　
2.510- 3.010 63.75 - 76.45 　 　 　 　 　 　 　 　 　 　 　
3.010 - 3.510 76.45 - 89.15 　 　 　 　 　 　 　 　 　 　 　
3.510 - 4.010 89.15 - 101.85 　 　 　 　 　 　 　 　 　 　 　
　
Tungsten Carbide Ring Gages - .040" - 2.510" (1.02mm - 63.75mm)
ALL RINGS tungsten carbide inserts with steel jackets.  MASTER: bilateral (split) tolerance. - GO: unilateral (one way) minus tolerance. - NO GO: unilateral (one way) plus tolerance.  Ring Gags are manufactured in accordance with ANSI spec B89.1.6 - 1989. ROUNDNESS and TARER of all gages will not exceed 50% of applicable gagmaker's size tolerance and are nonaccumulitive. - SIZES ABOVE AND BELOW THOSE LISTED will be quoted on request.
Size Range Class XX In
Quantities of:		 Class X In
Quantities of:		 Class Y In
Quantities of:		 Class Z In
Quantities of:
Inches
Above To and
Including		 Millimeters Above To and
Including		 1 2 3-5 1 2 3-5 1 2 3-5 1 2
.040 - .070 1.02 - 
1.78		 　 　 　 　 　 　 　 　 　 　 　
.070 - .125 1.78 - 
3.18		 　 　 　 　 　 　 　 　 　 　 　
.125 - .150 3.18 - 
3.81		 　 　 　 　 　 　 　 　 　 　 　
.150 - .240 3.81 - 
6.10		 　 　 　 　 　 　 　 　 　 　 　
.240 - .365 6.10 - 
9.27		 　 　 　 　 　 　 　 　 　 　 　
.365 - .510 9.27 - 
12.95		 　 　 　 　 　 　 　 　 　 　 　
.510 - .665 12.95 - 16.89 　 　 　 　 　 　 　 　 　 　 　
.665 - .825 16.89 - 20.96 　 　 　 　 　 　 　 　 　 　 　
.825 - .980 20.96 - 24.89 　 　 　 　 　 　 　 　 　 　 　
.980 - 1.135 24.89 - 28.83 　 　 　 　 　 　 　 　 　 　 　
1.135 - 1.355 28.83 - 33.91 　 　 　 　 　 　 　 　 　 　 　
1.355 - 1.510 33.91 - 38.35 　 　 　 　 　 　 　 　 　 　 　
1.510 - 1.760 38.35 - 44.70 　 　 　 　 　 　 　 　 　 　 　
1.760- 2.010 44.70 - 51.05 　 　 　 　 　 　 　 　 　 　 　
2.010 - 2.260 51.05 - 57.40 　 　 　 　 　 　 　 　 　 　 　
2.260 - 2.510 57.40 - 63.75